50 Ohm 7/8 In Coaxial Cable (Flame Retardant)
August 8, 2018
Leave a comment By Telecomusr
50 Ohm 7/8 In Coaxial Cable
50 Ohm 7/8 In Coaxial Cable (Flame Retardant)
· Item No.: RF50-78-F
· Size/Spec: 7/8” coaxial cable
· Function: signal transmission
Construction
| Inner conductor | Smooth copper tube | φ 8.7mm |
| Insulation | Foamed polyethylene | φ 22.5mm |
| Outer Conductor | Helical corrugated copper tube | φ 24.9mm |
| Jacket | Flame retardant black PE | φ 27.3mm |
1. High-performance of attenuation allows coaxial cable to be used in different RF systems, such as 3g, 4g mobile communication.
2. Wide range of applications, such as indoor distribution, broadcast, various base stations, wireless cellular, and others.
3. Lower VSWR, perfect shielding effectiveness, and extraordinary inter-modulation performance lead to fewer energy loss and outer interference.
Mechanical Properties
|
Min. single bending radius
|
120mm |
| Min. reapeted bending radius | 250mm |
| Max. tensile force | 1470N |
| Recommended maximum clamp spacing | 1m |
Electrical Properties
| Characteristic impedance | 50±1 Ω |
| Nominal capacitance | 75 pF/m |
| Nominal inductance | 0.19 μh/m |
|
Propagation velocity
|
86 % |
| DC breakdown voltage | 6.0 kv |
| Minmum insulation resistance | ＞5000 MΩ·km |
| Peak power rationg | 91 kw |
| Cut-off frequency | 5.5 Ghz |
| Screening attenuation | ＞120 dB |
| PIM | ≤-160 dBc@(2×20w) |
VSWR
| 690-960MHz | ≤ 1.12 |
| 1700-2200MHz | ≤ 1.12 |
| 2300-2400MHz | ≤ 1.12 |
| 2500-2690MHz | ≤ 1.15 |
Transmission properties
| Frequency
MHz |
Attenuation
@20℃,dB/100m(db/100ft) |
Power
@20℃,kW |
| 100 | 1.19(0.36) | 7.56 |
| 450 | 2.65(0.81) | 3.41 |
| 690 | 3.35(1.02) | 2.85 |
| 800 | 3.63(1.11) | 2.48 |
| 900 | 3.88(1.18) | 2.33 |
| 1000 | 4.12(1.26) | 2.19 |
| 1800 | 5.75(1.75) | 1.57 |
| 2000 | 6.11(1.86) | 1.48 |
| 2200 | 6.45(1.97) | 1.41 |
| 2400 | 6.79(2.07) | 1.34 |
| 2500 | 6.95(2.12) | 1.30 |
| 2600 | 7.12(2.17) | 1.27 |
| 2700 | 7.28(2.22) | 1.25 |
| 3000 | 7.76(2.37) | 1.16 |
※ Attenuation values may be with a tolerance of 5%.